The universal Multi measuring indicator easy cut-in measuring!

With this patent-registered measuring system you can measure easy, exact and fast on your precision turning and groove workpiece the clearance groove and web width, the total length/height as well as whose inside and outside layer, width and diameter

Your benefit:

  • all-purpose measurement
  • measuring in seconds
  • direct at the machining center
  • high precision of measurements
  • nondestructive measuring
  • simple application
  • various measuring characteristics with one measuring indicator
  • convertible very fast
  • we also produce special editions of measurements

Working range

  • measuring way: 8,00mm
  • external diameter AD: 10,00-100mm
  • inner diameter ID: 12,00-80mm
  • groove width: 1,10-80mm

Downloads

Product Flyer MultiMessFix
Manual MultiMessFix

Operating lnstructions of the MultiMessFix

Clearance groove measuring outside: Turn on the dial indicator, push the deflection lever down till it is blocked so that the measuring key button is placed on the measuring table. In this position neutralize the dial indicator (push it briefly)

Move the workpiece to the measuring key button, at the same time put the measuring key button in the right position by using the deflection lever so that it engages in the clearance groove. Move the measuring key button down, read the dial indicator value = a. layer of the clearance groove

Keep the position of the measuring key button. In this position neutralize the dial indicator (push it briefly)

Fix the workpiece in this position on the measuring table, move the measuring key button slowly upwards. Read the dial indicator value = b. width of the clearance groove

Clearance groove measuring inside: Put the workpiece over the measuring key button, push the deflection lever down till it is blocked so that the measuring key button is placed on the measuring table. In this position neutralize the dial indicator (push it briefly)

Move the workpiece it the measuring key button, at the same time put the measuring key button in the right position by using the deflection lever so that it engages in the clearance groove. Move the measuring key button down. Read the dial indicator value = d. layer of the clearance groove

Keep the position of the measuring key button. In this position push preset. In preset the final dimension has to be programmed (15,00mm)

Fix the workpiece in this position on the measuring table. Move the measuring key button slowly upwards. Read the dial indicator value = e. width of the clearance groove

Total height/lenght measuring. Adjust dial indicator with workpiece or distance piece. Move workpiece under the dial indicator cone point

Read the dial indicator. Value = f. total height/lenght

Diameter clearence groove measuring: Adjust dial indicator with workpiece or distance piece. Move workpiece between the fixed key button and the moving key button

Read the dial indicator. Value = g. clearence groove diameter

PALKA Messtechnik  |  Inh.: S. Palka
Weidenbühlstraße 9a  |  D-78247 Hilzingen, GERMANY
Telefon: +49 7739 926983-0  |  Telefax: +49 7739 926983-2
E-Mail: info@palka-messtechnik.de | Internet: www.palka-messtechnik.de